Harsh Torque Converter Clutch Apply or Release
WARNING: This page is about a different variant/trim than selected.
| Checks |
Cause |
| DEFINITION: An unacceptably quick TCC apply or release occurs in third or fourth gear, Drive or Manual third range, with the throttle held steady. |
| Control Valve Body Assembly |
- The TCC regulator apply valve (327) is stuck or binding.
- The TCC regulator apply valve spring (326) is missing or damaged.
- The TCC control valve spring (336) is missing or damaged.
- The control valve body spacer plate gaskets assembly (396) are misassembled or contain incorrect parts.
- TCC PWM Solenoid faulty.
|