Rear Seat Cushion Replacement (Impala)

Fig 1: Rear Seat Cushion

GM1818017

Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

1

Rear Seat Cushion Assembly

Procedure

Reach under the seat cushion and locate both the left and the right "T" handles.
Press down on the seat and pull the handles to release the seat retainer.
Remove the seat cushion by lifting the cushion up and pulling the cushion outward from the seat back.

Tip: The handles are hidden from view by the floor stowage compartment for the flip folding seat.