Instrument Cluster Replacement
Instrument Cluster Replacement
| Callout | Component Name |
|---|---|
|
CAUTION:
Preliminary Procedure Remove the instrument panel (I/P) cluster trim bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement
.In order to avoid cluster lens damage, DO NOT grasp the lens to remove the cluster. |
|
| 1 | Instrument Panel Cluster Screw (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 2 N.m (18 lb in) |
| 2 | Instrument Panel Cluster Assembly TIP: Disconnect the electrical connector. |
| 3 | Retainer Clip (Qty: 1) TIP: Remove the cluster by grasping the ridge about 13 mm (0.50 in) back from the lens. |