Stabilizer Shaft Insulator Replacement
Stabilizer Shaft Insulator Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . |
|
| 1 | Front Stabilizer Shaft Clamp Bolt
CAUTION:
Refer to Fastener Caution . Tighten 50 N.m (37 lb ft) |
| 2 | Front Stabilizer Shaft Clamp Nut Tighten 50 N.m (37 lb ft) |
| 3 | Front Stabilizer Shaft Clamp |
| 4 | Front Stabilizer Shaft Insulator TIP: Place the cut line of the insulator facing the rear of the vehicle. |