Coolant Recovery Reservoir Replacement

Coolant Recovery Reservoir Replacement

Removal Procedure

1. Partially drain the coolant. Refer to Cooling System Draining and Filling Cooling System Draining and Filling.
2. Disconnect the hose from the coolant recovery reservoir.
3. Remove the coolant recovery reservoir retaining screws.
4. Remove the coolant recovery reservoir.

Installation Procedure

1. Install the coolant recovery reservoir.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the coolant recovery reservoir retaining screws and tighten to 6 Nm (53 lb in).
3. Connect the hose to the coolant recovery reservoir.
4. Add coolant to reservoir. Refer to Cooling System Draining and Filling Cooling System Draining and Filling.