LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Cruze LTZ >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.4L (LDD, LDU, LUH, Or LUJ) - Repair Instructions - Off Vehicle (2 Of 2) >> Camshaft Cover Installation

Camshaft Cover Installation

  1. Clean the sealing surfaces.
    2. Fig 1: Sealing Compound Application Areas
    GM2190649Courtesy of GENERAL MOTORS CORP.
    NOTE: The thickness of the sealing bead should be 2 mm (0.0787 in).
  2. Apply sealing compound to areas (1) and (2). Refer to Adhesives, Fluids, Lubricants, and Sealers .
    3. Fig 2: Camshaft Cover And Gasket
    GM2190620Courtesy of GENERAL MOTORS CORP.
    NOTE: The installation procedure should not take longer than 10 minutes.
  3. Install the camshaft cover (2) and a NEW gasket (3).
  4. Install the 15 camshaft cover bolts (1).
    5. Fig 3: Camshaft Cover Bolts Tightening Sequence
    GM2190648Courtesy of GENERAL MOTORS CORP.
  5. Tighten the 15 camshaft cover bolts in a sequence as shown to 8 N.m (71 lb in).
    6. Fig 4: Engine Oil Level Indicator
    GM2190647Courtesy of GENERAL MOTORS CORP.
  6. Install the oil level indicator (1).
scientia non olet · About LEMON Manuals