LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Cruze LTZ >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Primary Latch and Hood Secondary Latch Replacement

Hood Primary Latch and Hood Secondary Latch Replacement

Fig 1: Hood Primary Latch and Hood Secondary Latch
GM2027132Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
  2. Remove the radiator grille support reinforcement. Refer to Radiator Grille Reinforcement Support Replacement .
1 Hood Primary and Secondary Latch Retainer Bolt (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tighten:  20 N.m (15 lb ft).
2 Hood Primary and Secondary Latch

Procedure

  1. To release the hood primary and secondary latch unhook the hood primary latch release cable.
  2. Disconnect electrical connectors as needed.
scientia non olet · About LEMON Manuals