Positive Crankcase Ventilation Pipe Installation
Courtesy of GENERAL MOTORS CORP.
- Install the positive crankcase ventilation pipe assembly (1) to the camshaft cover retainer clips.
- Connect the positive crankcase ventilation pipe to turbocharger (3).
- Install the charger air bypass valve pipe (2) to turbo charger waste regulator solenoid valve.
- Install the charger air bypass valve pipe to turbocharger.
- Fasten the charger air bypass valve pipe clamp (4).
Courtesy of GENERAL MOTORS CORP.
- Install the positive crankcase ventilation pipe to the intake manifold and fix with retainer clamp (1).
- Clip in the positive crankcase ventilation pipe to the 2 retainer clips (2) and (3).