LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Cruze LT >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.4L (LDD, LDU, LUH, Or LUJ) - Repair Instructions - Off Vehicle (2 Of 2) >> Intake Camshaft Installation

Intake Camshaft Installation

    Fig 1: Intake Camshaft, Bearing Caps And Bolts
    GM2190730Courtesy of GENERAL MOTORS CORP.
    NOTE: Mind the markings on the camshaft bearing caps. Camshaft bearing caps should be installed in their original position.
  1. Lubricate camshaft and camshaft bearing caps with engine oil.
  2. Install the intake camshaft (3).
  3. Install the 5 camshaft bearing caps (2).
  4. Install the 10 camshaft bearing cap bolts (1) and handtighten.
    5. Fig 2: Intake Camshaft Bearing Cap Bolts Tightening Sequence
    GM2190731Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
    NOTE: Tighten the camshaft bearing cap bolts one turn at a time in order to avoid shape distortion of the camshaft.
  5. Tighten the camshaft bearing cap bolts one turn at a time and in a spiral sequence as shown to 8 N.m (71 lb in).
scientia non olet · About LEMON Manuals