LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Cruze LT >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.4L (LDD, LDU, LUH, Or LUJ) - Repair Instructions - Off Vehicle (2 Of 2) >> Engine Oil Cooler Installation

Engine Oil Cooler Installation

    Fig 1: Locating Engine Oil Cooler Components
    GM2191862Courtesy of GENERAL MOTORS CORP.
    NOTE: Lubricate the oil cooler seal (8) with clean engine oil.
  1. Install the engine oil cooler assembly (6) along with 2 NEW sealings (8) and (9).
  2. Install the 3 oil cooler bolts (5) and tighten to 10 N.m (89 lb in).
  3. Install the oil cooler coolant outlet pipe bolt (7) and tighten to 10 N.m (89 lb in).
  4. Install the oil cooler coolant outlet hose (2) to the engine coolant thermostat housing.
  5. Install the oil cooler coolant outlet hose clamp (1).
  6. Install the oil cooler coolant inlet hose (4) to the water outlet.
  7. Install the oil cooler coolant inlet hose clamp (3).
scientia non olet · About LEMON Manuals