Engine Front Cover and Oil Pump Installation: Notes

Special Tools

• EN-952:  Fixing Pin
• EN-953-A:  Fixing Tool
• EN-49977-100:  Transmitter Disc Fixation
• EN-49977-200:  Fixing Tool

For equivalent regional tools, refer to Special Tools .

Fig 1: Engine Front Cover Bolts M6 And M10
Courtesy of GENERAL MOTORS CORP.
NOTE: Mind the guide sleeves when installing engine front cover.
1. Install the engine front cover (3).
2. Install the 13 engine front cover bolts M6 (1).
3. Install the 2 engine front cover bolts M10 (2).
CAUTION: Refer to Fastener Caution .
4. Tighten the 13 engine front cover bolts M6 to 8 N.m (71 lb in).
5. Tighten the 2 engine front cover bolts M10 to 35 N.m (26 lb ft).