LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Cruze LT >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.4L (LDD, LDU, LUH, Or LUJ) - Repair Instructions - Off Vehicle (1 Of 2) >> Camshaft Position Actuator Solenoid Valve Removal

Camshaft Position Actuator Solenoid Valve Removal

    Fig 1: Camshaft Position Actuator Solenoid Valve Bolts
    GM2191735Courtesy of GENERAL MOTORS CORP.
  1. Remove the 4 camshaft position actuator solenoid valve bolts (1).
    2. Fig 2: Intake Camshaft Position Actuator Solenoid Valve And Exhaust Camshaft Position Actuator Solenoid Valve
    GM2191733Courtesy of GENERAL MOTORS CORP.
  2. Move the intake camshaft position actuator solenoid valve (1) carefully counter clockwise in the position shown.
  3. Move the exhaust camshaft position actuator solenoid valve (2) carefully clockwise in the position shown.
    4. Fig 3: Camshaft Position Actuator Solenoid Valves And Seal Rings
    GM2190650Courtesy of GENERAL MOTORS CORP.
    CAUTION: The camshaft position actuator solenoid valves must be kept parallel to the engine front cover during removal and installation. The camshaft position actuator solenoid valves can be damaged if they become wedged or stuck during this process.
  4. Carefully remove the 2 camshaft position actuator solenoid valves (2) and the seal rings (1).
scientia non olet · About LEMON Manuals