Rear Wheelhouse Panel Liner Replacement

Fig 1: View Of Rear Wheelhouse Panel Liner, Retainers, Nuts And Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
1	Rear Wheelhouse Panel Liner Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 2.5 N.m (23 lb in)
2	Rear Wheelhouse Panel Liner Nut (Qty: 2) Tighten: 2.5 N.m (23 lb in)
3	Rear Wheelhouse Panel Liner Plastic Retainer (Qty: 2)
4	Rear Wheelhouse Panel Liner