Rear Compartment Lid Replacement

Fig 1: Rear Compartment Lid Hinge Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the rear compartment lid inner panel trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .
1	Rear Compartment Lid Hinge Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 9 N.m (80 lb ft)
2	Rear Compartment Lid Procedure Disconnect the electrical connector. Adjust rear compartment as needed. Refer to Rear Compartment Lid Adjustment . Transfer components as necessary.

Callout

Component Name

Preliminary Procedure:
Remove the rear compartment lid inner panel trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .

Rear Compartment Lid Hinge Bolt (Qty: 4)

CAUTION: Refer to Fastener Caution .

Tighten: 9 N.m (80 lb ft)

Rear Compartment Lid

Procedure