Hood Replacement

Fig 1: Hood Hinge Reinforcement Nuts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
WARNING: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. Preliminary Procedure: Remove the windshield washer nozzle hose. Refer to Windshield Washer Nozzle Hose Replacement .
1	Hood Hinge Reinforcement Nut (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 26 N.m (19 lb ft)
2	Hood Procedure Transfer components as necessary. Adjust hood as needed. Refer to Hood Adjustment .

Callout

Component Name

WARNING: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Preliminary Procedure: Remove the windshield washer nozzle hose. Refer to Windshield Washer Nozzle Hose Replacement .

Hood Hinge Reinforcement Nut (Qty: 4)

CAUTION: Refer to Fastener Caution .

Tighten: 26 N.m (19 lb ft)

Hood

Procedure

Transfer components as necessary.
Adjust hood as needed. Refer to Hood Adjustment .