LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Cruze LS, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.8L (2H0 Or LUW) - Troubleshooting & Diagnosis >> Diagnostic Information and Procedures >> Oil Pressure Diagnosis and Testing >> Installation Procedure

Installation Procedure

  1. Switch off the engine.
  2. Remove the EN-232:  adapter.
  3. Remove the EN-498-B:  gauge.
  4. Install new closure bolt in the cylinder head.
    5. CAUTION: Refer to Fastener Caution .
  5. Tighten the closure bolt to 15 N.m (11 lb ft).
  6. Check the engine oil level.
scientia non olet · About LEMON Manuals