LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Cruze LS, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.8L (2H0 Or LUW) - Repair Instructions - Off Vehicle (2 Of 2) >> Water Pump Pulley Installation

Water Pump Pulley Installation

    Fig 1: Identifying Water Pump And Water Pump Pulley
    GM2026887Courtesy of GENERAL MOTORS CORP.
    NOTE: Counterhold the crankshaft balancer. The belt has to be installed for this procedure.
  1. Install the water pump pulley (2) to the water pump (3).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the 3 water pump pulley bolts (1) with locking compound. Refer to Adhesives, Fluids, Lubricants, and Sealers .
  3. Tighten the 3 water pump pulley bolts (1) to 20 N.m (15 lb ft).
scientia non olet · About LEMON Manuals