Special Tools

EN-652:  Flywheel Holder

For equivalent regional tools, refer to Special Tools .

Fig 1: Flywheel And Flywheel Holder
Courtesy of GENERAL MOTORS CORP.
1. Install the EN-652:  holder (1), lock the flywheel via the starter ring gear.
2. Loosen the 6 flywheel bolts.
3. Remove the EN-652:  holder (1).
Fig 2: Flywheel And Bolts
Courtesy of GENERAL MOTORS CORP.
4. Remove the 6 flywheel bolts (1, 2).
5. Remove the flywheel (3).