LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Cruze LS, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.8L (2H0 Or LUW) - Repair Instructions - Off Vehicle (1 Of 2) >> Engine Block Disassemble (1.6L LDE, LXV, 1.8L 2H0, and LUW)

Engine Block Disassemble (1.6L LDE, LXV, 1.8L 2H0, and LUW)

    Fig 1: Cylinder Head Locating
    GM2026868Courtesy of GENERAL MOTORS CORP.
  1. Remove the cylinder head locating (1, 2).
    2. Fig 2: Oil Pressure Switch
    GM2026870Courtesy of GENERAL MOTORS CORP.
  2. Remove the oil pressure switch (1).
    3. Fig 3: Knock Sensor And Bolt
    GM2026869Courtesy of GENERAL MOTORS CORP.
  3. Remove the knock sensor bolt (2) and the knock sensor (1).
  4. Clean the thread.
    5. Fig 4: Oil Flow Check Valve
    GM2026901Courtesy of GENERAL MOTORS CORP.
  5. Remove the oil flow check valve (1).
    6. Fig 5: Oil Pressure Relief Valve Closure Bolt
    GM2026539Courtesy of GENERAL MOTORS CORP.
  6. Remove the oil pressure relief valve closure bolt (1) and the oil pressure relief valve.
    7. Fig 6: Piston, Spring And Oil Pressure Relief Valve Closure Bolt
    GM2026540Courtesy of GENERAL MOTORS CORP.
  7. Remove the piston (1) and spring (2) from the oil pressure relief valve closure bolt (3).
  8. Clean and inspect the components. Refer to Engine Block Cleaning and Inspection .
  9. Clean the thread.
    10. Fig 7: Piston Oil Nozzles
    GM2026902Courtesy of GENERAL MOTORS CORP.
  10. Remove the 4 piston oil nozzles (1).
scientia non olet · About LEMON Manuals