LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Cruze LS, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.8L (2H0 Or LUW) - Repair Instructions - Off Vehicle (1 Of 2) >> Crankshaft Front Oil Seal Removal >> Special Tools

Special Tools

EN-45000:  Remover

For equivalent regional tools, refer to Special Tools .

Fig 1: Crankshaft And Crankshaft Front Oil Seal
GM2373394Courtesy of GENERAL MOTORS CORP.
CAUTION: Clean the crankshaft sealing surface with a clean, lint-free towel. Inspect lead-in edge of crankshaft for burrs/sharp edges that could damage the rear main oil seal. Remove burrs/sharp edges with crocus cloth before proceeding.

Using the EN-45000:  remover, remove the crankshaft front oil seal (1) from the crankshaft (2).

scientia non olet · About LEMON Manuals