K9 Body Control Module X7 Connector End Views

Fig 1: K9 Body Control Module X7 Connector End Views

Courtesy of GENERAL MOTORS CORP.

K9 Body Control Module X7

Pin	Wire	Circuit	Function
1	0.5 GY	157	Interior Lamp Control
2	1 WH/BN	6815	Inadvertent Power Control
3	0.35 D-GN/WH	1324	Backup Lamp Control
	0.5 D-GN/WH	1324	Backup Lamp Control
4-5	-	-	Not Used
6	0.5 VT/BK	7553	Park Lock Solenoid Control
7	0.5 D-GN/GY	737	Trunk Lamp Control
8	-	-	Not Used
9	0.5 YE	6817	LED Backlight Dimming Control
10	-	-	Not Used
11	0.5 GY	748	Right Rear Door Ajar Switch Signal
12	0.5 BN/WH	3269	Child Security Lock Motor Status Signal Left Rear
13	0.5 WH/VT	5905	Key Capture/Column Lock Shift Position Signal
14	0.5 GY	746	Right Front Door Ajar Switch Signal
15	0.5 D-BU/VT	1134	Park Brake Switch Signal
16	0.5 D-GN/BK	5103	Technology Identification
17	-	-	Not Used
18	0.5 GY/BK	3268	Child Security Lock Motor Status Signal Right Rear
19	0.5 D-G/-BN	6998	Inadvertent Load 1 Supply Voltage
20-22	-	-	Not Used
23	0.5 D-GN	5060	Low Speed GMLAN Serial Data
24	-	-	Not Used
25	0.5 GY	745	Left Front Door Ajar Switch Signal

Connector Part Information  Harness: Body OEM: 19151265 Service Connector: 19151265 Description: 26-Way F 0.64 2.8 Series (GY)

Terminal Part Information  Pins: Terminal Removal Tool T1 (0.5 - Pin 4-7, 9, 11-19, 23, 25) Terminated Lead: Release Tool: MKM-923-1A, 5A, 6A / J-38125-12A Diagnostic Test Probe: J-35616-64B (L-BU) Pins: Terminal Removal Tool T2 (0.5/1.0 - Pin 1-3) Terminated Lead: - Release Tool: MKM-923-1A, 5A, 6A / J-38125-12A Diagnostic Test Probe: J-35616-35 (VT)