Clutch Pedal Position Sensor / Switch: Service and Repair

Clutch Pedal Position Sensor Replacement

Removal Procedure




1. Disconnect the clutch pedal position sensor wiring harness plug.
2. Remove the clutch pedal position sensor bolt (2).
3. Remove the clutch pedal position sensor (1).

Installation Procedure




1. Install the clutch pedal position sensor (1).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the clutch pedal position sensor bolt (2) and tighten to 3 Nm(27 lb in).
3. Connect the clutch pedal position sensor wiring harness plug.
4. Learn clutch pedal position sensor, refer to Clutch Pedal Position Sensor Learn (Programming and Relearning).