LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Corvette ZR-1 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Automatic Transmission - 6L80-E - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Transmission Fluid Pan Installation

Transmission Fluid Pan Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Transmission Fluid Pan & Bolt Tightening Sequence
GM1582848Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Fluid Pan Gasket
Tip:  The fluid pan gasket is reusable. Inspect the gasket to determine if it may be reused. If the gasket is stuck to the case or pan, it should be replaced.
2 Fluid Pan Assembly
3 Fluid Pan Bolt M6 x 20 (Qty: 18)
CAUTION: Refer to Fastener Caution .

Procedure: 
Tighten in the sequence shown.

Tighten:  9 N.m (80 lb in)