Control Valve Lower Body Assembly Cleaning and Inspection
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
|
WARNING:
Valve springs can be tightly compressed. Use care when removing retainers and plugs. Personal injury could result.
CAUTION:
After cleaning the transmission components, allow to air dry. Do not use cloth or paper towels in order to dry any transmission components. Lint from the towels can cause component failure.
CAUTION:
Do not reuse cleaning solvents. Previously used solvents may deposit sediment which may damage the component. Preliminary Procedure: Clean and inspect all valve components and the valve body. The control valve lower body is replaceable only as an assembly. |
|
| 1 | Clutch Piston Dam Feed Regulator Valve Train |
| 2 | Clutch Select Solenoid Valve 3 Train |
| 3 | Clutch Select Solenoid Valve 2 Train |
| 4 | Manual Valve |
| 5 | TCC Regulator Apply Valve Train |