Control Solenoid Valve Assembly Removal
WARNING: This page is about a different variant/trim than selected.
Control Solenoid Valve Assembly Removal
| Callout | Component Name |
|---|---|
| 1 | Bolt M5 x 53 (Qty: 2) |
| 2 | Bolt M5 x 55 (Qty: 4) |
| 3 | Bolt M5 x 45 (Qty: 5) |
| 4 | Control Solenoid (w/Body and TCM) Valve Assembly
CAUTION:
Use care when handling the control valve body assembly. If dropped, damage to the control solenoid valve body assembly internal components, including the transmission control module (TCM), may result.
|
| 5 | Filter Plate Assembly
CAUTION:
Use care when removing or installing the filter plate assembly. A broken or missing retaining tab may not adequately secure the filter plate to the control solenoid valve assembly, resulting in possible damage or contamination.
CAUTION:
Discard the filter plate. Replace with a NEW filter plate. Reusing an old filter plate may cause damage to the control solenoid valve assembly.
|