Automatic Transmission Range Selector Lever Replacement
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
|
Preliminary Procedures
|
|
| 1 | Range Selector Lever Nut
WARNING:
Hold the transmission range selector lever while removing or installing the lever retaining nut. Failure to hold the lever can cause damage to the transmission internal park system components which could allow the vehicle to roll when placed in the park position.
CAUTION:
Refer to Fastener Caution
.
Tighten: 20 N.m (15 lb ft) |
| 2 | Range Selector Lever |