No Park or Drive

WARNING: This page is about a different variant/trim than selected.

Checks	Causes
Output Shaft Assembly (70)	Inspect for a broken or damaged output shaft. Inspect for worn splines.
Automatic Transmission Case	Inspect for broken or damaged case. Inspect for broken or bent park pawl actuator. Inspect for broken or missing park pawl actuator guide pin or manual shaft pin. Inspect for broken, loose or misaligned park pawl guide. Inspect for binding or broken park pawl or actuator assembly.
Manual Shift Detent Lever (505)	Inspect for broken or disengaged manual valve detent.