LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Corvette ZR-1 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 6.2L Or 7.0L - Repair Instructions - Off Vehicle (4 Of 5) >> Throttle Body Assembly Installation (6.2L LS3)

Throttle Body Assembly Installation (6.2L LS3)

    Fig 1: Throttle Body, Gasket And Bolts
    GM1875999Courtesy of GENERAL MOTORS CORP.
    NOTE: DO NOT use the throttle body gasket again. Install a NEW gasket during assembly.
  1. Install the throttle body gasket (509) to the intake manifold. Align the locating tab of the gasket with the notch in the manifold.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the throttle body (508) and bolts (538). Tighten the throttle body bolts to 10 N.m (89 lb in).
scientia non olet · About LEMON Manuals