Oil Tank Cleaning and Inspection
- Clean the large and small oil tanks (1 and 2) in solvent.
- Clean the tube (3) in solvent.
Inspect for the following:
- Dirt or debris
- Damaged seal surfaces
- Transfer tube fittings for damaged O-ring seals, replace as required
- Restrictions within the positive crankcase ventilation (PCV) tubes or oil transfer tube
- A dirty or restricted tube (3)
- Clean the screen and inspect for the following:
- Plugged or damaged screen (1)
- Broken locking tabs (2), replace as required.
WARNING:
Refer to Safety Glasses Warning
.
CAUTION:
Refer to Engine Oil Tank Debris Caution
.