LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Corvette ZR-1 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 6.2L Or 7.0L - Repair Instructions - Off Vehicle (3 Of 5) >> Intake Manifold Cleaning and Inspection (7.0L) >> Cleaning Procedure

Cleaning Procedure

    Fig 1: Intake Manifold Gaskets
    GM1552471Courtesy of GENERAL MOTORS CORP.
  1. Remove and discard the intake manifold-to-cylinder head gaskets (514).
  2. Remove the manifold absolute pressure (MAP) sensor. Refer to Intake Manifold Removal (7.0L) .
  3. Remove the evaporative (EVAP) emission canister purge solenoid valve, EVAP tubes, and fuel rail with injectors. Refer to Fuel Rail and Injectors Removal (7.0L) .
  4. Remove the throttle body and gasket. Refer to Throttle Body Assembly Removal (7.0L) .
  5. Clean the intake manifold in solvent.
    6. WARNING: Refer to Safety Glasses Warning .
  6. Dry the intake manifold with compressed air.
scientia non olet · About LEMON Manuals