Engine Mechanical - 6.2L Or 7.0L - Repair Instructions - Off Vehicle (2 Of 5)

• Crankshaft Rear Oil Seal Housing Removal
• Oil Pump, Screen and Crankshaft Oil Deflector Removal (6.2L LS3)
• Oil Pump and Crankshaft Oil Deflector Removal (LS3 with Z52 Option, LS7, LS9)
• Timing Chain and Sprocket Removal (6.2L LS3)
• Timing Chain and Sprocket Removal (LS3 with Z52 Option, LS7)
• Timing Chain and Sprocket Removal (6.2L LS9)
• Camshaft Removal (6.2L LS3)
• Camshaft Removal (LS3 with Z52 Option, LS7, LS9)
• Piston, Connecting Rod, and Bearing Removal
• Crankshaft and Bearing Removal
• Engine Block Plug Removal
• Engine Block Cleaning and Inspection
  • Special Tools
  • Cleaning Procedure
  • Inspection Procedure
  • Measuring the Cylinder for Oversize
• Cylinder Boring and Honing
  • Boring Procedure
  • Honing Procedure
  • Deglazing Procedure
• Crankshaft and Bearing Cleaning and Inspection
  • Special Tools
  • Cleaning Procedure
  • Inspection Procedure
  • Measuring Main Bearing Clearance - Gaging Plastic Method
  • Measuring Connecting Rod Bearing Clearance - Gaging Plastic Method
  • Measuring Connecting Rod Bearing Clearance - Using J 43690/J 43690-100
• Crankshaft Balancer Cleaning and Inspection
  • Notes
  • Replacing the Crankshaft Balancer and Balance Weights
• Engine Flywheel Cleaning and Inspection (6.2L LS3)
• Engine Flywheel Cleaning and Inspection (6.2L LS9)
• Engine Flywheel Cleaning and Inspection (7.0L)
• Piston and Connecting Rod Disassemble (6.2L LS3)
• Piston and Connecting Rod Disassemble (6.2L LS9)
• Piston and Connecting Rod Disassemble (7.0L)
• Piston, Connecting Rod, and Bearing Cleaning and Inspection (6.2L LS3)
  • Piston, Pin, and Piston Rings
  • Measuring Piston Ring End Gap
  • Connecting Rod and Bearings
• Piston, Connecting Rod, and Bearing Cleaning and Inspection (6.2L LS9)
  • Piston, Pin, and Piston Rings
  • Measuring Piston Ring End Gap
  • Connecting Rod and Bearings
• Piston, Connecting Rod, and Bearing Cleaning and Inspection (7.0L)
  • Piston, Pin, and Piston Rings
  • Measuring Piston Ring End Gap
  • Connecting Rod and Bearings
• Piston and Connecting Rod Assemble (6.2L LS3)
• Piston and Connecting Rod Assemble (6.2L LS9)
• Piston and Connecting Rod Assemble (7.0L)
• Camshaft Bearing Removal
  • Special Tools
  • Tool Usage Information
    • Bearing, Expander, and Expander Driver Information
    • Tool Assembly and Operation
• Camshaft and Bearings Cleaning and Inspection
  • Special Tools
  • Measuring Camshaft Lobe Lift
• Camshaft Bearing Installation
  • Special Tools
• Camshaft Timing Chain and Sprocket Cleaning and Inspection (6.2L LS3)
• Camshaft Timing Chain and Sprocket Cleaning and Inspection (LS3 with Z52 Option, LS7, LS9)
• Valve Rocker Arm and Push Rod Cleaning and Inspection (6.2L LS3)
• Valve Rocker Arm and Push Rod Cleaning and Inspection (6.2L LS9)
• Valve Rocker Arm and Push Rod Cleaning and Inspection (7.0L)
• Valve Lifter and Guide Cleaning and Inspection
  • Valve Lifters
  • Valve Guides
• Cylinder Head Disassemble
  • Special Tools
• Cylinder Head Cleaning and Inspection (LS3, LS9)
• Cylinder Head Cleaning and Inspection (7.0L)
• Valve Guide Reaming, and Valve and Seat Grinding (6.2L LS3)
  • Valve Guide Reaming
  • Valve and Seat Grinding
• Valve Guide Reaming, and Valve and Seat Grinding (LS3, LS9)
  • Special Tools
  • Valve Guide Reaming
  • Valve and Seat Grinding
• Valve Guide Reaming, and Valve and Seat Grinding (7.0L)
  • Special Tools
  • Valve Guide Reaming
  • Valve and Seat Grinding
• Cylinder Head Assemble
  • Special Tools
• Oil Pump Disassemble (6.2L LS3)
• Oil Pump Disassemble (LS3 with Z52 Option, LS7)
• Oil Pump Disassemble (6.2L LS9)
• Oil Pump Cleaning and Inspection (6.2L LS3)
• Oil Pump Cleaning and Inspection (LS3 with Z52 Option, LS7)
• Oil Pump Cleaning and Inspection (6.2L LS9)
• Oil Pump Assemble (6.2L LS3)