LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Corvette ZR-1 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 6.2L Or 7.0L - Repair Instructions - Off Vehicle (1 Of 5) >> Oil Level Indicator and Tube Removal (6.2L LS3)

Oil Level Indicator and Tube Removal (6.2L LS3)

    Fig 1: Oil Level Indicator Tube
    GM639837Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil level indicator from the tube.
  2. Remove the oil level indicator tube bolt.
  3. Remove the oil level indicator tube from the engine block.
    4. NOTE: Inspect the O-ring for cuts or damage. The O-ring may be used again if it is not cut or damaged.
  4. Remove the O-ring from the tube, as required.
scientia non olet · About LEMON Manuals