LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Corvette ZR-1 >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 6.2L Or 7.0L - Repair Instructions >> Repair Instructions >> Evaporative Emission System Hose/Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: Refer to Fuel and Evaporative Emission Pipe Warning .
  1. Remove the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement (LS9) or Upper Intake Manifold Sight Shield Replacement (w/o LS9) .
    2. Fig 1: EVAP System Hoses/Pipes
    GM1481776Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the quick-connect fittings at the evaporative emission (EVAP) canister purge valve (7). Refer to Plastic Collar Quick Connect Fitting Service .
  3. Remove the EVAP pipe (2).
scientia non olet · About LEMON Manuals