LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Corvette ZR-1 >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 6.2L Or 7.0L - Repair Instructions >> Repair Instructions >> Evaporative Emission Canister Vent Solenoid Valve Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of EVAP Canister Vent Valve & Vent Hose
    GM561130Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the evaporative emission (EVAP) canister valve harness connector.
  3. Disconnect the vent hose (2) from the EVAP canister vent valve (1).
    4. Fig 2: View Of EVAP Canister Vent Valve & Bracket
    GM329567Courtesy of GENERAL MOTORS CORP.
  4. Remove the EVAP canister vent valve (2) from the vent bracket (1).
scientia non olet · About LEMON Manuals