LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Corvette ZR-1 >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 6.2L Or 7.0L - Repair Instructions >> Repair Instructions >> Evaporative Emission Canister Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of EVAP Canister Vent Hose
    GM561128Courtesy of GENERAL MOTORS CORP.
  1. Remove the right fuel tank.
  2. Disconnect the vent hose from the evaporative emission (EVAP) canister.
    3. Fig 2: View Of EVAP Canister Purge Pipe
    GM609762Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the purge pipe at the EVAP canister.
    4. Fig 3: View Of EVAP Canister
    GM561136Courtesy of GENERAL MOTORS CORP.
  4. Remove the EVAP canister bracket bolt (3).
  5. Remove the EVAP canister (1) from the EVAP canister bracket (2).
scientia non olet · About LEMON Manuals