LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Corvette ZR-1 >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 6.2L Or 7.0L - Repair Instructions >> Repair Instructions >> Evaporative Emission Canister Purge Solenoid Valve Replacement (LS9)

Evaporative Emission Canister Purge Solenoid Valve Replacement (LS9)

Fig 1: Evaporative Emission Canister Purge Solenoid Valve (LS9)
GM2157355Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the upper intake cover. Refer to Upper Intake Manifold Sight Shield Replacement (LS9) or Upper Intake Manifold Sight Shield Replacement (w/o LS9)
1 Bolt
CAUTION: Refer to Fastener Caution .

Tighten:  10 N.m (89 lb in)
2 Evaporative Emission Canister Purge Valve

Procedure

  1. Disconnect the EVAP canister purge valve harness connector.
  2. Disconnect the EVAP canister purge tube from the purge valve.
scientia non olet · About LEMON Manuals