LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Corvette Z06 >> Repair and Diagnosis >> External Pages >> Different car >> Section 406 (Antilock Brake System - Non-Hybrid Less Than 3900 Kg (8600 Lb) GVW) >> Repair Instructions >> Front Wheel Speed Sensor Replacement

Front Wheel Speed Sensor Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Wheel Speed Sensor & Components
GM1858124Courtesy of GENERAL MOTORS COMPANY
Front Wheel Speed Sensor Replacement

Callout Component Name
WARNING:

Refer to Brake Dust Warning .

Preliminary Procedures

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Remove the brake rotor. Refer to Front Brake Rotor Replacement (1500 Series) , Front Brake Rotor Replacement (2500 Series) .
1 Wheel Speed Sensor Electrical Connector Clip

Procedure

  1. Disconnect the electrical connector.
  2. Release the wheel speed sensor electrical connector clip from the brake hose bracket.
2 Wheel Speed Sensor Harness Clip
Procedure 
Release the wheel speed sensor harness clip from the brake hose bracket.
3 Wheel Speed Sensor Harness Clip
Procedure 
Release the wheel speed sensor harness clip from the steering knuckle bracket.
4 Wheel Speed Sensor Bolt
CAUTION:

Refer to Fastener Caution .


Tighten 
13 N.m (115 lb in)
5 Wheel Speed Sensor
Procedure 
Perform the Diagnostic System Check - Vehicle .