LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Corvette Z06 >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (Antilock Brake System - Non-Hybrid Less Than 3900 Kg (8600 Lb) GVW) >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Brake Pipe Fitting- Brake Pressure Modulator Valve (BPMV) Inlet- With JL4 32 N.m 24 lb ft
Brake Pipe Fitting- BPMV Inlet- Without JL4 25 N.m 18 lb ft
Brake Pipe Fitting- BPMV Outlet 18 N.m 13 lb ft
BPMV Bracket Bolt 22 N.m 16 lb ft
BPMV Bolt 10 N.m 89 lb in
BPMV Nut 9 N.m 80 lb in
Electronic Brake Control Module (EBCM) Bolt 3 N.m 27 lb in
Wheel Speed Sensor Bolt (Front) 13 N.m 115 lb in
Wheel Speed Sensor Bolt (Rear) 13 N.m 115 lb in
Yaw Rate Sensor/Lateral Accelerometer Nut 7 N.m 62 lb in