LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Corvette Z06 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 6.2L Or 7.0L - Repair Instructions - Off Vehicle (2 Of 5) >> Camshaft Removal (LS3 with Z52 Option, LS7, LS9)

Camshaft Removal (LS3 with Z52 Option, LS7, LS9)

    Fig 1: Camshaft Retainer & Bolts
    GM1552492Courtesy of GENERAL MOTORS CORP.
  1. Remove the camshaft retainer bolts (204) and retainer (203).
    2. Fig 2: Removing/Installing Camshaft
    GM1552493Courtesy of GENERAL MOTORS CORP.
    CAUTION: All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the camshaft bearings.
  2. Remove the camshaft.
    1. Install the 3 M8-1.25 x 100 mm bolts into the camshaft front bolt holes.
    2. Using the bolts as a handle, carefully rotate and pull the camshaft out of the engine block.
    3. Remove the bolts from the front of the camshaft.
scientia non olet · About LEMON Manuals