LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Corvette Z06 >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 6.2L Or 7.0L - Repair Instructions >> Repair Instructions >> Fuel Tank Filler Hose Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Fuel Fill Hose & Vent Hose
    GM562230Courtesy of GENERAL MOTORS CORP.
  1. Remove the left fuel tank. Refer to Fuel Level Sensor Replacement - Left Side .
  2. Remove the fuel fill hose (1) from the fuel tank.
  3. Cap the open end of the fuel tank.
scientia non olet · About LEMON Manuals