Glove Box Lamp Switch: Service and Repair

Instrument Panel Compartment Lamp Switch Replacement

Removal Procedure




1. Remove the instrument panel (I/P) passenger compartment. Refer to Instrument Panel Compartment Replacement (Service and Repair).
2. Depress the tabs on the sides of the I/P compartment lamp switch.
3. Carefully push the switch and lamp unit out of the opening and remove.

Installation Procedure




1. Position the I/P compartment lamp and switch unit into the opening in the I/P passenger compartment.
2. Push on the switch, snapping the switch into the panel.
3. Install the I/P passenger compartment. Refer to Instrument Panel Compartment Replacement (Service and Repair).