Drive Belt Tensioner Replacement - Air Conditioning

Drive Belt Tensioner Replacement - Air Conditioning

Removal Procedure




1. Remove the air conditioning (A/C) drive belt. Refer to Air Conditioning Compressor Belt Replacement (w/o LS9) (Air Conditioning Compressor Belt Replacement).
2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
3. Loosen the A/C drive belt tensioner bolt.
4. Remove the A/C drive belt tensioner.

Installation Procedure




1. Install the A/C drive belt tensioner.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Tighten the A/C drive belt tensioner bolt.

Tighten the A/C drive belt tensioner bolt to 50 Nm (37 lb ft).

3. Lower the vehicle.
4. Install the A/C drive belt. Refer to Air Conditioning Compressor Belt Replacement (w/o LS9) (Air Conditioning Compressor Belt Replacement).