LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Driver or Passenger Seat Replacement

Driver or Passenger Seat Replacement

Fig 1: View Of Driver Or Passenger Seat
GM1937528Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Enable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the driver seat adjuster finish cover. Refer to Driver or Passenger Seat Adjuster Finish Cover Replacement .
  3. Remove the seat belt retaining nut and the seat belt from the anchor stud. Refer to Seat Belt Retractor Replacement - Left Front (Convertible) or Seat Belt Retractor Replacement - Left Front (Coupe) .
1 Driver and Passenger Seat (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tighten:  50 N.m (37 lb ft)
2 Driver and Passenger Seat Nut

Tighten:  50 N.m (37 lb ft)
3 Driver and Passenger Seat

Procedure

  1. Disconnect any electrical connectors.
  2. Transfer components as necessary.
scientia non olet · About LEMON Manuals