|
Preliminary Procedures
- Disable the SIR system. Refer to SIR Disabling and Enabling
.
- Remove the defroster grille. Refer to Defroster Grille Replacement
.
- Remove the steering wheel. Refer to Steering Wheel Replacement
.
- Remove the instrument panel cluster. Refer to Instrument Cluster Replacement
.
- Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
- Remove the right console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side .
- Remove the radio assembly. Refer to Radio Replacement
.
- Remove the instrument panel insulators. Refer to Instrument Panel Insulator Panel Replacement .
- Remove the instrument panel driver knee bolster assembly. Refer to Driver Knee Bolster Panel Replacement .
- Remove the automatic transmission control. Refer to Transmission Control Replacement
.
|
| 1 |
Instrument Panel Assembly Trim Cover Nut (Qty: 2)
Tighten:
6 N.m (53 lb in)
|
| 2 |
Instrument Panel Assembly Screw (Qty: 3) Tighten:
2 N.m (17 lb in)
|
| 3 |
Instrument Panel Assembly Bolt (Qty: 2) Tighten:
12 N.m (106 lb in)
|
| 4 |
Instrument Panel Assembly Screw (Qty: 2) Tighten:
6 N.m (53 lb in)
|
| 5 |
Instrument Panel Assembly Nut Tighten:
6 N.m (53 lb in)
|
| 6 |
Instrument Panel Assembly Screw
Procedure:
Open the instrument panel compartment to access the screws.Tighten:
6 N.m (53 lb in)
|
| 7 |
Instrument Panel Assembly Screw (Qty: 2)
Procedure:
Open the instrument panel compartment to access the screws.Tighten:
2 N.m (18 lb in)
|
| 8 |
Instrument Panel Assembly to Inflatable Restraint Module Bolt (Qty: 3) Tighten:
12 N.m (53 lb in)
|
| 9 |
Instrument Panel Assembly Procedures
- Note the location and routing of the instrument panel wiring harness prior to removal of the instrument panel assembly in order to ensure proper reinstallation.
- With the aid of an assistant, lift the instrument panel assembly up and off of the upper and lower tie bars and over the steering column.
- Remove the instrument panel assembly from the vehicle.
- When replacing the instrument panel assembly, transfer all necessary components.
|