Transmission Control Lever Knob Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front floor console front cover. Refer to Front Floor Console Front Cover Replacement (Without UMQ) or Front Floor Console Front Cover Replacement (With UMQ) . |
|
| 1 | Transmission Control Lever Knob Assembly Fastener (Qty: 4) |
| 2 | Manual Transmission Control Lever Knob Assembly Procedure: First remove the 4 fasteners securing the manual transmission control lever knob assembly to the front floor console. Tip: Firmly pull upward until knob is released from control assembly. Tighten: 9 N.m (80 lb in) |