LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Camaro LS, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Diagnostic Information and Procedures >> Transmission Fluid Temperature Gauge Inaccurate or Inoperative >> Circuit/System Verification

Circuit/System Verification

without TCM

  1. Ignition ON, perform the Auxiliary Gauge Sweep test with the scan tool, verify that the transmission fluid temperature gauge sweeps from its low to high position.
    • If the transmission fluid temperature gauge does not sweep, replace the P26 Auxiliary Gauge Module.
  2. If the engine oil pressure gauge does sweep, replace the K20 Engine Control Module.

with TCM

  1. Ignition ON, perform the Auxiliary Gauge Sweep test with the scan tool, verify that the transmission fluid temperature gauge sweeps from its low to high position.
    • If the transmission fluid temperature gauge does not sweep, replace the P26 Auxiliary Gauge Module.
  2. If the engine oil pressure gauge does sweep, replace the K71 Transmission Control Module.
scientia non olet · About LEMON Manuals