Transmission Control Lever Knob Replacement

Fig 1: Transmission Control Lever Knob & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Transmission Control Lever Knob Cover Procedure: Use a flat-bladed plastic trim tool to remove the knob cover.
2	Transmission Control Lever Knob Fastener CAUTION: Refer to Fastener Caution . Tighten: 3 N.m (27 lb in)
3	Transmission Control Lever Knob Procedure Pull up on the transmission control level knob to remove. Transfer components as necessary.

Callout

Component Name

Transmission Control Lever Knob Cover
Procedure:
Use a flat-bladed plastic trim tool to remove the knob cover.

Transmission Control Lever Knob Fastener

CAUTION: Refer to Fastener Caution .

Tighten: 3 N.m (27 lb in)

Transmission Control Lever Knob

Procedure