LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Camaro LS, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Diagnostic Information and Procedures >> Engine Oil Temperature Gauge Inoperative >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, perform the Auxiliary Gauge Sweep test with the scan tool, verify that the engine oil temperature gauge sweeps from its low to high position.
    • If the fuel engine oil pressure gauge does not sweep, replace the P26 Auxiliary Gauge Module.
  2. If the engine oil temperature gauge does sweep, replace the K20 Engine Control Module.
scientia non olet · About LEMON Manuals