Conditions for Running the DTC
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- The ignition voltage is greater than 11 V.
- The ignition switch is in the Crank or Run position.
- The ECM commanded the Camshaft Position Actuator Solenoid Valve On.
- DTCs P0010, P0013, P0020, P0023 and P2088 - P2095 run continuously when the above conditions are met.