LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 518 (Power Outlets) >> Diagnostic Information and Procedures >> Power Outlet Receptacle Malfunction (110V AC) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Connect an AC powered device to the Accessory Power Receptacle - 110V AC.
  3. Verify the Accessory DC/AC Power Control Module is turned ON and the device works as expected.
    • If the device is not powered 

      Refer to Circuit/System Testing.

    • If the device is powered 
  4. All OK.